Product Overview

CEMTEK KVB-Enertec is a full service CEMS company with multiple offices and a network of field service technicians across the United States. Our company offers superior CEMS engineering, integration, consulting, support, parts and service.


We are an organization dedicated to forward thinking solutions for today's environmental compliance challenges and continual process efficiency improvements.


CEMTEK supplies CEMS to measure all gases including NOx, CO2, SO2, HCl, SO3, O2, THC, NMHC, CH4, Hg, O3, H2S and more


Below is an overview of our products.

CEMS Sampling Interface Systems

Depending on the application, CEMTEK KVB-Enertec offers a number of sampling system options for both ambient and source‐level monitoring systems, including fully extractive and dilution CEMS. After reviewing the application, we will recommend the best system design for your application. The application and sample constituents are examined to determine sample material and type of system. Ambient monitoring systems are concerned with sample contamination and the accuracy of low‐level measurements. Source‐level or fully extractive systems are designed to keep the probe and sample line heated to maintain the sample above its dew point to prevent condensation and refrigerated condenser, thermo‐electric cooler, or permeation dryer type gas conditioning systems are used to remove moisture from the sample. With dilution extractive systems, an out of stack probe is recommended with heat trace or freeze‐protected or unheated sample lines as required.

888-400-0200

Gas Analyzers

CEMTEK KVB-Enertec engineers select from a variety of infrared, ultraviolet, and visible light techniques in designing the best analyzers for the monitoring system. The company has experience with the following optical technologies:


  • Chemiluminescence commonly used to measure NO, NO2 and NOx
  • Ultraviolet Absorption and Florescence for SO2
  • Nondispersive Infrared Spectroscopy (NDIR) for CO2, methane, some hydrocarbons, and higher levels of CO and SO2
  • Gas filter correlation NDIR for low levels of CO
  • Ultraviolet Absorption and Florescence for SO2
  • Flame Ionization Detection FID for hydrocarbons
  • Infrared Absorption for CO2, CO, SO2, and Hazardous Air Pollutants (HAPs)
  • Gas Chromatograph for H2S and multiple gas species
  • Fourier Transform Infrared Spectroscopy (FTIR) for simultaneous monitoring of multiple gas species
  • Visible Light Transmission to determine opacity and particulate matter (PM)
  • Back scatter light technology
  • Infrared Tunable Diode Lasers (TDL) for NH3, HCl, HCN, CO, O2 and other process applications
  • Cavity Ring Down Spectroscopy (CRDS) for HCl and process gases
  • Mercury CEMS integration, field service and training
  • Particulate Monitoring for stationary sources and wet FGD stacks
  • Differential Optical Absorption Spectrometer (DOAS)


CEMTEK KVB-Enertec has the expertise to choose the correct analyzer technologies with the best accuracy to meet regulatory needs while minimizing maintenance requirements. Since uptime and availability are major considerations in configuring the system, only the highest quality and most reliable analyzers are used.

Products

  • Dilution Extractive CEMS
  • Fenceline Monitoring
  • Fully Extractive CEMS
  • Refinery Petrochem CEMS
  • Tunable Diode Laser (TDL)
  • Mercury Sorbent Trap Systems
  • Ambient Air Monitoring Systems
  • Gas Analyzer
  • Quantum Cascade Laser Analyzer
  • Differential Optical Absorption Spectrometer
CONTACT US